Receive Signal Level Status; Current Sweep Value - Comtech EF Data SDM-650B Installation And Operation Manual

SDM-650B Satellite Modem
B.1.4.11 Receive Signal Level Status
Command:
Response:
B.1.4.12 Current Sweep Value
This command returns the current sweep value and the decoder lock status.
Command:
Response:
Rev. 6
<add/RSL_"cr"
>add/RSL_-nn.ndBm"cr""lf"]
<add/CSV_"cr""lf"]
>add/CSV_snnnnn"cr"
CD_xxx"cr""lf"]
Where:
s = + or - (sweep offset direction).
nnnnn = 0 to 25000.
xxx = OK or FLT (decoder lock status OK or FAULT).
Remote Control Operation
B–25