Comtech EF Data SDM-650B Installation And Operation Manual page 320

Trojan Interface
G.6.4.2.2.1 Demodulator Filter Rate Assignment
Command:
Response:
Status Only:
Response:
Note: The parameters "nnn_mmmm.m" may be replaced by "N/A" to indicate "no
assignment."
Example:
Command:
Response:
G.6.4.2.2.2 Select Demodulator Rate
Command:
Response:
Status Only:
Note: If the modem is commanded to a filter (rate) which is not assigned (N/A), the error 2
message will be returned.
G.6.4.2.2.3 Select Demodulator Rate Variable
Note: This command is only applicable for the variable rate option.
Command:
Response:
Status Only:
G–24
<add/ADRx_nnn_mmmm.m"cr"
>add/ADRx_nnn_mmmm.m"cr""lf"]
<add/ADRx_"cr"
>add/ADRx_nnn_mmmm.m"cr""lf"]
Where:
nnn = 1/2, 3/4, 7/8, or BP12 (Decoder rate).
mmmm.m = 9.6 to 4080.0 (Data rate).
<add/ADRx_N/A"cr"
>add/ADRx_N/A"cr""lf"]
<add/SDRx_"cr"
>add/SDRx_"cr""lf"]
(See the DR command.)
Where: x = A, B, C, or D (Filter designator).
<add/SDRV_nnn_mmmm.m"cr"
>add/SDRV_nnn_mmmm.m"cr""lf"]
(See the DR command.)
Where:
nnn = 1/2, 3/4, 7/8, or BP12 (Coder rate).
mmmm.m = 9.6 to 4080.0 (Data rate).
SDM-650B Satellite Modem
Rev. 5