Common Equipment Stored Faults; Interface Receive Side Status Stored Faults - Comtech EF Data SDM-650B Installation And Operation Manual

SDM-650B Satellite Modem
B.1.4.13.3 Common Equipment Stored Faults
Command:
Response:
B.1.4.13.4 Interface Receive Side Status Stored Faults
Command:
Response:
Note: This command is only valid when Buffer Control is enabled. See the "BUFF_"
command definition.
Rev. 6
<add/CSF_#"cr"
>add/CSF_# hh:mm:ss
M&C_xxx"cr"
INT_xxx"cr"
TXC_xxx"cr"
BAT_xxx"cr"
PS1_xxx"cr"
PS2_xxx"cr"
PS3_xxx"cr""lf"]
<add/IRSF_#"cr"
>add/IRSF_# hh:mm:ss
OVFL_xxx"cr"
UNFL_xxx"cr""lf"]
MM/DD/YY"cr"
Monitor and Control Module (OK/FLT)
Data Interface Module (OK/FLT)
Transmit Clock Loss (DS1 only)
Battery (OK/FLT)
+5V Power Supply (OK/FLT)
+12V Power Supply (OK/FLT)
-12V Power Supply (OK/FLT)
MM/DD/YY"cr"
Buffer Overflow (OK/FLT)
Buffer Underflow (OK/FLT)
Remote Control Operation
B–27