Table of Contents
Advertisement
Asynchronous Overhead Channel Unit
F.5.2 Menu Explanations
F.5.2.1 Select Configuration
Refer to Table F-3.
Modem configuration may be viewed or changed by entering the Config menu from the
Select menu on the front panel. After entering the Config menu, use
one of the following configurations:
•
•
•
•
Enter the selected Config menu by pressing [ENTER]. Use
selected configuration parameters. Press [ENTER] to begin the configuration process.
Then, use the arrow keys to make the changes.
After the changes are made and the display represents the correct parameters, execute the
change by pressing [ENTER]. When [ENTER] is pressed, the necessary programming is
initiated by the modem. Press [CLEAR] to interrupt the process.
The following sections describe each configuration function in detail.
F–20
MOD
DEMOD
INTERFACE
AUPC
SDM-650B Satellite Modem
and
to select
[
←
]
[
→
]
and
to view the
[
←
]
[
→
]
Rev. 5
Advertisement
Chapters
Table of Contents
