Interface Coding Format Transmit; Interface Coding Format Receive; Interface Buffer Center; Interface Buffer Size - Comtech EF Data SDM-650B Installation And Operation Manual

SDM-650B Satellite Modem
B.2.5.7 Interface Coding Format Transmit
Command:
Response:
Status Only: <add/ICFT_"cr"
Response:
B.2.5.8 Interface Coding Format Receive
Command:
Response:
Status Only: <add/ICFR_"cr"
Response:
B.2.5.9 Interface Buffer Center
This command centers the interface buffer.
Command:
Response:
Note: Available with buffer support hardware only.
B.2.5.10 Interface Buffer Size
Command:
Response:
Status Only: <add/IBS_"cr"
Response:
Note: Available with buffer support hardware only.
Rev. 6
<add/ICFT_xxxx"cr"
>add/ICFT_xxxx"cr""lf"]
>add/ICFT_xxxx"cr""lf"]
Where: xxxx = AMI, HDB3, B6ZS, or B8ZS.
<add/ICFR_xxxx"cr"
>add/ICFR_xxxx"cr""lf"]
>add/ICFR_xxxx"cr""lf"]
Where: xxxx = AMI, HDB3, B6ZS, or B8ZS.
<add/IBC_"cr"
>add/IBC_"cr""lf"]
<add/IBS_nnnnnn"cr"
>add/IBS_nnnnnn"cr""lf"]
>add/IBS_nnnnnn"cr""lf"]
Where: nnnnnn = 32 to 262144, in 16-bit increments.
Remote Control Operation
B–47