Comtech EF Data SDM-650B Installation And Operation Manual page 332

Trojan Interface
G.6.4.5.5 Common Equipment Status
The common equipment status command causes a block of data to be returned which
indicates the status of the common equipment.
Command:
Response:
G.6.4.5.6 Bit Error Rate Status
G.6.4.5.6.1 Raw BER
Command:
Response:
Example:
Request Raw BER from modem 123.
Command:
Response:
Note: "No Data" is returned if no carrier is detected (decoder not locked).
G–36
<add/CES_"cr"
>add/CES_"cr"
M&C_xxx"cr"
REF_xxx"cr"
OVFL_xxx"cr"
UNFL_xxx"cr"
BAT_xxx"cr"
PS1_xxx"cr"
PS2_xxx"cr"
PS3_xxx"cr"
MODE_xxxxxx"cr"
SW_x.xxx"cr"
SFLT_xx"cr""lf"]
<add/RBER_"cr"
>add/RBER_nnnnE-4"cr""lf"]
Where: nnnn = RBER or < 1.0 (lower limit).
<123/RBER_"cr"
>123/RBER_152E-4"cr""lf"]
SDM-650B Satellite Modem
Monitor & Control Module (OK/FLT)
Interface Reference Clock (OK/FLT)
Doppler Buffer overflow (OK/FLT)
Doppler Buffer underflow (OK/FLT)
battery (OK/FLT)
+5V power supply (OK/FLT)
+12V power supply (OK/FLT)
-12V power supply (OK/FLT)
Mode (LOCAL or REMOTE)
Software Version
Number of stored faults logged (0 to 10)
RBER = 0.0152 errors/bit
Rev. 5