Comtech EF Data SDM-650B Installation And Operation Manual page 285

SDM-650B Satellite Modem
RX BAUD
CH LENTH
Stop BIT
PARITY
Rev. 5
Programs the receiver baud rate.
On entry, the current receiver baud rate is displayed with the flashing
cursor on the first character. Use [
The baud rate may be programmed from 110 to 38,400 bit/s. Press
[ENTER] to execute the change.
Programs the character length for the ASYNC format.
On entry, the current character length is displayed with the flashing
cursor on the first character. Use [
Press [ENTER] to execute the change.
Programs the number of stop bits to 1 or 2.
On entry, the current status of the stop bits is displayed with the flashing
cursor on the first character. Use [
Press [ENTER] to execute the change.
Programs the parity check to even, odd, or none.
On entry, the current status of the parity check is displayed with the
flashing cursor on the first character. Use the arrow keys to select Even,
Odd, or None. Press [ENTER] to execute the change.
Asynchronous Overhead Channel Unit
↑ ] and [ ↓ ] to select the desired rate.
↑ ] and [ ↓ ] to select 5, 6, 7, or 8 bits.
↑ ] and [ ↓ ] to select 1 or 2 stop bits.
F–27