Subaru 2009 IMPREZA Service Manual page 1107

14.Timing Belt Cover
A: REMOVAL
NOTE:
Perform the work with the engine installed to body
when replacing a single part.
1) Remove the secondary air pump. <Ref. to
EC(H4DOTC)-24, REMOVAL, Secondary Air Pump.>
2) Remove the V-belts. <Ref. to ME(H4DOTC)-40,
REMOVAL, V-belt.>
3) Remove the crank
ME(H4DOTC)-47, REMOVAL, Crank Pulley.>
4) Remove the timing belt cover LH (A).
5) Remove the timing belt cover RH (B).
6) Remove the front timing belt cover (C).
(B)
B: INSTALLATION
1) Install the front timing belt cover (C).
Tightening torque:
5 N·m (0.5 kgf-m, 3.7 ft-lb)
2) Install the timing belt cover RH (B).
Tightening torque:
5 N·m (0.5 kgf-m, 3.7 ft-lb)
3) Install the timing belt cover LH (A).
Tightening torque:
5 N·m (0.5 kgf-m, 3.7 ft-lb)
(B)
4) Install the crank pulley. <Ref. to ME(H4DOTC)-
47, INSTALLATION, Crank Pulley.>
5) Install the V-belts. <Ref. to ME(H4DOTC)-40,
INSTALLATION, V-belt.>
6) Install the secondary air pump. <Ref. to
EC(H4DOTC)-24, INSTALLATION, Secondary Air
Pump.>
Timing Belt Cover
pulley. <Ref. to
(A)
(C)
ME-00064
(A)
(C)
ME-00064
ME(H4DOTC)-49
C: INSPECTION
Check the timing belt cover for damage.
MECHANICAL