Subaru 2009 IMPREZA Service Manual page 1103

13) Slowly turn the crank pulley clockwise, and in-
stall the rear side belt.
CAUTION:
Be careful that the total of procedures 8), 11),
12) and 13) does not exceed 330°; failure to do
so may cause damage to the rear side belt and
fall of the belt guide holder.
14) Remove the belt guide and belt guide holder
from the crank pulley.
V-belt
330
ME-03510
ME-03526
ME(H4DOTC)-45
15) Remove the belt stopper from the compressor
bracket.
CAUTION:
Always remove the belt stopper; failure to do so
may cause smoke, fire, or belt cutting.
16) Make sure that the belt rib is securely installed
on the groove of each pulley, then turn the crank
pulley slowly, twice in the clockwise direction, to
seat the rear side belt properly.
360 x2
17) Discard the provided tools (belt stopper, belt
guide, belt guide holder, and bolt) that are used.
18) Install the front
ME(H4DOTC)-40, FRONT SIDE BELT, INSTAL-
LATION, V-belt.>
MECHANICAL
ME-03525
ME-03511
side belt. <Ref. to