Subaru 2009 IMPREZA Service Manual page 1009

FUEL INJECTION (FUEL SYSTEMS)
32.Fuel Delivery, Return and Evaporation Lines
A: REMOVAL
WARNING:
Place "NO OPEN FLAMES" signs near the
working area.
CAUTION:
Be careful not to spill fuel.
1) Set the vehicle on a lift.
2) Release the fuel
FU(H4DOTC)-60, RELEASING OF FUEL PRES-
SURE, PROCEDURE, Fuel.>
3) Open the fuel filler lid and remove the fuel filler
cap.
4) Remove the floor mat. <Ref. to EI-68, REMOV-
AL, Floor Mat.>
5) In the engine compartment, disconnect the fuel
delivery hoses, fuel return hoses and evaporation
hoses.
CAUTION:
• Be careful not to spill fuel.
• Catch the fuel from hoses using a container
or cloth.
(1) Set the ST to the fuel pipe.
ST 42099AE000 QUICK CONNECTOR
RELEASE
(2) Disconnect the quick connector of the fuel
delivery hose and fuel return hose by pushing
the ST in the direction of the arrow.
Fuel Delivery, Return and Evaporation Lines
pressure. <Ref.
FU(H4DOTC)-84
(3) Remove the clip and disconnect the evapo-
ration hose from the fuel pipe.
ST
to
(A) Fuel delivery hose
(B) Fuel return hose
(C) Evaporation hose
6) Remove the canister. <Ref. to EC(H4DOTC)-7,
REMOVAL, Canister.>
7) Remove the fuel tank. <Ref. to FU(H4DOTC)-
62, REMOVAL, Fuel Tank.>
8) Remove the fuel pipe assembly.
(A)
(C)
(B)
FU-03430
FU-03429