Subaru 2009 IMPREZA Service Manual page 1202

COOLING
5) Connect the radiator inlet hose (A).
6) Install the reservoir
CO(H4DOTC)-29, INSTALLATION,
Tank.>
7) Install the air intake duct. <Ref. to IN(H4DOTC)-
11, INSTALLATION, Air Intake Duct.>
8) Lift up the vehicle.
9) Connect the ATF cooler hoses. (AT model)
10) Connect the radiator outlet hose.
Radiator
(A)
CO-02368
tank. <Ref. to
Reservoir
CO-00253
CO-02455
CO(H4DOTC)-22
11) Connect the connectors of main fan motor con-
nector (A) and sub fan motor connector (B).
(A)
(B)
12) Install the heat shield cover to the radiator. (AT
model)
Tightening torque:
3 N·m (0.3 kgf-m, 2.2 ft-lb)
13) Install the under cover.
14) Lower the vehicle.
15) Connect the ground cable to battery.
CO-02366
CO-02367
CO-02355
IN-00203