Subaru 2009 IMPREZA Service Manual page 1134

MECHANICAL
20.Cylinder Block
A: REMOVAL
NOTE:
Before conducting this procedure, drain the engine
oil completely.
1) Remove the V-belts. <Ref. to ME(H4DOTC)-40,
REMOVAL, V-belt.>
2) Remove the intake
FU(H4DOTC)-16, REMOVAL, Intake Manifold.>
3) Remove the crank
ME(H4DOTC)-47, REMOVAL, Crank Pulley.>
4) Remove the timing belt cover. <Ref. to
ME(H4DOTC)-49, REMOVAL, Timing Belt Cover.>
5) Remove the timing belt. <Ref. to ME(H4DOTC)-
50, REMOVAL, Timing Belt.>
6) Remove the cam
ME(H4DOTC)-59, REMOVAL, Cam Sprocket.>
7) Remove the crank
ME(H4DOTC)-60, REMOVAL, Crank Sprocket.>
8) Remove the generator and A/C compressor with
their brackets.
9) Remove the camshaft. <Ref. to ME(H4DOTC)-
61, REMOVAL, Camshaft.>
10) Remove the cylinder
ME(H4DOTC)-67, REMOVAL, Cylinder Head.>
11) Use the ST to lock the crankshaft, and remove
the drive plate. (AT model)
ST 498497100 CRANKSHAFT STOPPER
12) Remove the clutch disc and cover. (MT model)
<Ref. to CL-10, REMOVAL, Clutch Disc and Cov-
er.>
13) Remove the flywheel. (MT model) <Ref. to CL-
13, REMOVAL, Flywheel.>
14) Remove the oil separator cover.
15) Remove the water by-pass pipe for heater.
16) Remove the oil filter. <Ref. to LU(H4SO)-21,
REMOVAL, Engine Oil Filter.>
17) Remove the water
CO(H4DOTC)-16, REMOVAL, Water Pump.>
Cylinder Block
manifold. <Ref. to
pulley. <Ref. to
sprocket. <Ref. to
sprocket. <Ref. to
head. <Ref. to
ST
ME-00136
pump. <Ref. to
ME(H4DOTC)-76