Subaru 2009 IMPREZA Service Manual page 1203

Hide thumbs Also See for 2009 IMPREZA:

16) Fill engine coolant. <Ref. to CO(H4DOTC)-14,

FILLING OF ENGINE COOLANT, REPLACE-

MENT, Engine Coolant.>

17) Check the ATF level. (AT model) <Ref. to 4AT-

27, INSPECTION, Automatic Transmission Fluid.>

C: INSPECTION

1) Remove the coolant filler tank cap, fill the cool-

ant filler tank with engine coolant, then install the

tester to the installation position of the cap.

2) Apply a pressure of 122 kPa (1.2 kg/cm

to the radiator and check the following points:

• Leakage from the radiator or its vicinity

• Leakage from the hose or its connections

• Inspection must be carried out at the side of

coolant filler tank, not at the side of radiator.

• Engine should be turned off.

• Wipe engine coolant from check points in ad-

• Be careful of the spurt of engine coolant

when removing the tester.

• Be careful not to deform the filler neck of the

coolant filler tank when installing and removing

CO(H4DOTC)-23