Subaru 2009 IMPREZA Service Manual page 1122

MECHANICAL
7) Install the timing belt cover No. 2 RH.
Tightening torque:
5 N·m (0.5 kgf-m, 3.7 ft-lb)
8) Install the timing belt cover No. 2 LH.
Tightening torque:
5 N·m (0.5 kgf-m, 3.7 ft-lb)
9) Install the cam sprocket. <Ref. to ME(H4DOTC)-
59, INSTALLATION, Cam Sprocket.>
10) Install the timing belt. <Ref. to ME(H4DOTC)-
52, INSTALLATION, Timing Belt.>
11) Adjust the valve
ME(H4DOTC)-28, ADJUSTMENT, Valve Clear-
ance.>
12) Install the rocker cover.
(1) Install the rocker cover gasket to the rocker
cover. (Outer section and ignition coil section)
NOTE:
Use a new rocker cover gasket.
Camshaft
ME-00107
ME-00106
clearance. <Ref. to
ME(H4DOTC)-64
(2) Apply liquid gasket to the specified point of
the cylinder head.
NOTE:
Install within 5 min. after applying liquid gasket.
Liquid gasket:
THREE BOND 1217G (Part No. K0877Y0100)
or equivalent
(3) Install the rocker cover onto cylinder heads.
Ensure the gasket is properly positioned during
installation.
(4) Temporarily tighten the rocker cover tight-
ening bolts in alphabetical order shown in the
figure, and then tighten to specified torque in al-
phabetical order.
Tightening torque:
6.4 N·m (0.7 kgf-m, 4.7 ft-lb)
(C),(K)
(E)
(A),(I)
(G)
(D),(L)
ME-03143
(H)
(B),(J)
(F)
ME-00777