6. Intercooler
A: REMOVAL
1) Disconnect the air by-pass pipe (A) and vacuum
hose (B) from the air by-pass valve.
2) Loosen the clamp (C) which connects the inter-
cooler and intake duct.
(A)
(C)
3) Remove the bolts which secure the intercooler to
the turbocharger.
4) Remove the bolts which secure the intercooler to
the intercooler stay, and remove the intercooler.
5) Remove the brake booster vacuum hose from
the clip (A), and remove the intercooler stay.
Intercooler
(B)
IN-02301
IN-02467
IN-02468
(A)
IN-02478
IN(H4DOTC)-13
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
• Use new O-rings.
• Be careful not to pinch the O-ring.
Tightening torque:
16 N·m (1.6 kgf-m, 11.8 ft-lb)
Tightening torque:
3 N·m (0.3 kgf-m, 2.2 ft-lb)
INTAKE (INDUCTION)
IN-02303
IN-02467
IN-02468
IN-02304