Subaru 2009 IMPREZA Service Manual page 1201

10) Lower the vehicle.
11) Remove the air intake duct. <Ref. to
IN(H4DOTC)-11, REMOVAL, Air Intake Duct.>
12) Remove the reservoir
CO(H4DOTC)-29, REMOVAL, Reservoir Tank.>
13) Disconnect the radiator inlet hose (A) from the
radiator.
14) Disconnect the two coolant filler tank hoses
from the radiator.
15) Remove the radiator upper brackets.
16) Move the radiator to the left while lifting it up-
ward.
17) Lift the radiator up and remove the radiator
from vehicle.
Radiator
tank. <Ref. to
(A)
CO-02368
CO-02406
CO-02370
CO(H4DOTC)-21
B: INSTALLATION
1) Attach the radiator lower cushion to the hole on
the radiator lower bracket.
2) Install the radiator to vehicle.
NOTE:
Make pins on the lower side of radiator be fitted into
the radiator lower cushions.
3) Install the radiator upper brackets and tighten
the bolts.
Tightening torque:
12 N·m (1.2 kgf-m, 8.9 ft-lb)
4) Connect the two coolant filler tank hoses to the
radiator.
COOLING
CO-00041
CO-02370
CO-02406