Subaru 2009 IMPREZA Service Manual page 1051

INTAKE (INDUCTION)
5. Intake Duct
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the intake
FU(H4DOTC)-16, REMOVAL, Intake Manifold.>
3) Remove the sensor, engine harness and fuel
pipe attached to the intake manifold. <Ref. to
FU(H4DOTC)-25, DISASSEMBLY, Intake Mani-
fold.>
4) Remove the intake duct from intake manifold.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
17 N·m (1.7 kgf-m, 12.5 ft-lb)
Intake Duct
IN-00203
manifold. <Ref. to
IN-02505
IN-02505
IN(H4DOTC)-12