Subaru 2009 IMPREZA Service Manual page 1023

Hide thumbs Also See for 2009 IMPREZA:

5. Purge Control Solenoid Valve

1. PURGE CONTROL SOLENOID VALVE 1

1) Disconnect the ground cable from battery.

2) Remove the bolts which secure purge control

solenoid valve 1 to the intake manifold, and discon-

nect the connector from the purge control solenoid

3) Disconnect the evaporation hose from the intake

manifold and fuel pipe assembly.

Purge Control Solenoid Valve

EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)

EC(H4DOTC)-11

2. PURGE CONTROL SOLENOID VALVE 2

1) Disconnect the ground cable from battery.

2) Remove the solenoid valve bracket assembly

from the intake manifold.

3) Disconnect the connector from purge control so-

lenoid valve 2.

4) Disconnect the evaporation hose from the intake

duct and fuel pipe assembly.

5) Remove the purge control solenoid valve 2 from

the solenoid valve bracket assembly.