Subaru 2009 IMPREZA Service Manual page 1054

7. Turbocharger
A: REMOVAL
1) Set the vehicle on a lift.
2) Disconnect the ground cable from battery.
3) Lift up the vehicle.
4) Drain approximately 3.0 2 (3.2 US qt, 2.6 Imp
qt) of coolant. <Ref. to CO(H4DOTC)-14, DRAIN-
ING OF ENGINE COOLANT, REPLACEMENT,
Engine Coolant.>
5) Lower the vehicle.
6) Remove the intercooler. <Ref. to IN(H4DOTC)-
13, REMOVAL, Intercooler.>
7) Remove the center exhaust pipe. <Ref. to
EX(H4DOTC)-8, REMOVAL,
Pipe.>
8) Lower the vehicle.
9) Remove the joint pipe from the turbocharger.
10) Disconnect the engine coolant hoses from
coolant filler tank.
Turbocharger
IN-00203
Center Exhaust
IN-02305
IN-02507
IN(H4DOTC)-15
11) Disconnect the air control hose (A), and loosen
the clamp holding the turbocharger to the intake
duct.
• Except for WRX-SS model
• WRX-SS model
12) Remove the oil inlet pipe from the turbocharg-
er.
• Except for WRX-SS model
• WRX-SS model
INTAKE (INDUCTION)
(A)
IN-02454
(A)
IN-02567
IN-02455
IN-02568