Subaru 2009 IMPREZA Service Manual page 1137

Hide thumbs Also See for 2009 IMPREZA:

28) Rotate the crankshaft to bring #1 and #2 pis-

tons to bottom dead center position, then remove

the piston snap ring through service hole of #1 and

#2 cylinders.

29) Draw out the piston pin from #1 and #2 pistons

ST 499097700

PISTON PIN REMOVER

Be careful not to confuse the original combination

of piston, piston pin and cylinder.

30) Similarly draw out the piston pins from #3 and

31) Remove the cylinder block connecting bolt on

the RH side.

32) Loosen the cylinder block connecting bolt on

the LH side by 2 to 3 turns.

33) Set the part so that the cylinder block LH is on

the upper side, and remove the cylinder block con-

necting bolt.

Cylinder Block

ME(H4DOTC)-79