Subaru 2009 IMPREZA Service Manual page 1095

Hide thumbs Also See for 2009 IMPREZA:

26) Install the coolant filler tank. <Ref. to

CO(H4DOTC)-30, INSTALLATION, Coolant Filler

27) Install the air cleaner case and air intake duct.

<Ref. to IN(H4DOTC)-9, INSTALLATION, Air

Cleaner Case.> <Ref. to IN(H4DOTC)-11, IN-

STALLATION, Air Intake Duct.>

28) Install the battery. <Ref. to SC(H4SO)-22, IN-

STALLATION, Battery.>

29) Fill engine coolant. <Ref. to CO(H4DOTC)-14,

FILLING OF ENGINE COOLANT, REPLACE-

MENT, Engine Coolant.>

30) Charge the A/C system with refrigerant. <Ref.

to AC-22, PROCEDURE, Refrigerant Charging

31) Check the ATF level and replenish it if neces-

sary. (AT model) <Ref. to 4AT-27, INSPECTION,

Automatic Transmission Fluid.>

32) Install the V-belt cover.

Tightening torque:

13 N·m (1.3 kgf-m, 9.6 ft-lb)

33) Change the bolt installation position from (B) to

(A), then close the front hood.

Tightening torque:

7.5 N·m (0.8 kgf-m, 5.5 ft-lb)

Engine Assembly

C: INSPECTION

1) Check that pipes, hoses, connectors and clamps

are installed firmly.

2) Check the engine coolant is at specified level.

3) Check that the ATF is at specified level. (AT

4) Start the engine and check for exhaust gas, en-

gine coolant, leaks of fuel, etc. Also check for noise

and vibrations.

ME(H4DOTC)-37