Subaru 2009 IMPREZA Service Manual page 1024

EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
B: INSTALLATION
1. PURGE CONTROL SOLENOID VALVE 1
Install in the reverse order of removal.
NOTE:
Connect the evaporation hose as shown in the fig-
ure.
(A)
(c) (a)
(B)
(b)
(A) Purge control solenoid valve 1
(B) Purge control solenoid valve 2
(a) To intake manifold
(b) To intake duct
(c) To fuel pipe
Tightening torque:
6.4 N·m (0.7 kgf-m, 4.7 ft-lb)
Purge Control Solenoid Valve
(c)
EC-02201
EC-02265
EC(H4DOTC)-12
2. PURGE CONTROL SOLENOID VALVE 2
Install in the reverse order of removal.
NOTE:
Connect the evaporation hose as shown in the fig-
ure.
(A)
(c) (a)
(B)
(b)
(A) Purge control solenoid valve 1
(B) Purge control solenoid valve 2
(a) To intake manifold
(b) To intake duct
(c) To fuel pipe
Tightening torque:
6.4 N·m (0.7 kgf-m, 4.7 ft-lb)
(c)
EC-02201
EC-02266