Coolant Filler Tank - Subaru 2009 IMPREZA Service Manual

Hide thumbs Also See for 2009 IMPREZA:

11.Coolant Filler Tank

The coolant filler tank is pressurized when the

engine and radiator are hot. Wait until engine

and radiator cool down before working on the

coolant filler tank.

1) Drain approximately 3.0 2 (3.2 US qt, 2.6 Imp

qt) of coolant. <Ref. to CO(H4DOTC)-14, DRAIN-

ING OF ENGINE COOLANT, REPLACEMENT,

Engine Coolant.>

2) Disconnect the engine coolant hoses from cool-

ant filler tank.

3) Remove the bolts which secure the coolant filler

4) Disconnect the engine coolant hose which con-

nects the under side of coolant filler tank.

5) Remove the coolant filler tank.

B: INSTALLATION

Install in the reverse order of removal.

Tightening torque:

16 N·m (1.6 kgf-m, 11.8 ft-lb)

Coolant Filler Tank

CO(H4DOTC)-30