Subaru 2009 IMPREZA Service Manual page 1205

8. Radiator Main Fan and Fan
Motor
A: REMOVAL
1) Set the vehicle on a lift.
2) Disconnect the ground cable from battery.
3) Lift up the vehicle.
4) Remove the under cover.
5) Disconnect the main fan motor connector (A).
(A)
6) Remove the heat shield cover from radiator. (AT
model)
Radiator Main Fan and Fan Motor
IN-00203
CO-02366
CO-02355
CO(H4DOTC)-25
7) Remove the ATF hose from the hose clip of the
radiator main fan motor assembly. (AT model)
8) Lower the vehicle.
9) Remove the air
IN(H4DOTC)-11, REMOVAL, Air Intake Duct.>
10) Remove the reservoir
CO(H4DOTC)-29, REMOVAL, Reservoir Tank.>
11) Remove the bolts which secure the radiator
main fan motor assembly and the over flow pipe.
12) Remove the radiator main fan motor assembly
from the upper side of the vehicle.
COOLING
CO-02375
intake duct. <Ref.
tank. <Ref.
CO-02511
to
to