Subaru 2009 IMPREZA Service Manual page 1277

ENGINE (DIAGNOSTICS)
15) Clicking the [Exit] button completes the com-
pulsory valve operation check mode. The display
will then return to the «Actuator ON/OFF Opera-
tion» screen.
• A list of the support data is shown in the following
table.
Description
Compulsory fuel pump relay opera-
tion check
Compulsory purge control solenoid
valve operation check
Compulsory purge control solenoid
valve 2 operation check
Compulsory radiator fan relay
operation check
Compulsory air conditioning relay
operation check
Compulsory wastegate control
solenoid valve operation check
Compulsory pressure control
solenoid valve operation check
Compulsory drain valve operation
check
Compulsory secondary air
combination valve 1 operation check
Compulsory secondary air
combination valve 2 operation check
Compulsory secondary air pump
relay operation check
NOTE:
• The following parts will be displayed but not
functional.
Display
EGR Solenoid Valve
ASV Solenoid Valve
FICD Solenoid
Pressure Switching Sol.1
Pressure Switching Sol.2
AAI Solenoid Valve
Tank Sensor Cntl Valve
EXH. Bypass Control Permit Flag
Sub Fuel Pump Relay
Fuel Pressure Switching Solenoid
• For detailed operation procedures, refer to
"PC application help for Subaru Select Monitor".
Compulsory Valve Operation Check Mode
Display
Fuel Pump Relay
CPC Solenoid
Valve
CPC Solenoid 2
Radiator Fan Relay
A/C Compressor
Relay
Turbocharger
Wastegate Solenoid
PCV Solenoid Valve
Vent. Solenoid
Valve
Secondary Air
Combi Valve 2
Secondary Air
Combi Valve 2
Secondary Air
Pump Relay
EN(H4DOTC)(diag)-56