Subaru 2009 IMPREZA Service Manual page 1048

3. Air Cleaner Case
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the air
IN(H4DOTC)-11, REMOVAL, Air Intake Duct.>
3) Disconnect the connector from air flow and in-
take air temperature sensor.
4) Loosen the clamp (B) which connects the air in-
take boot and intake duct.
5) Remove the clip (C) from the air cleaner case
(front).
(A)
(C)
(C)
6) Remove the air cleaner case (rear) and air in-
take boot.
7) Remove the air cleaner element.
8) Remove the bolt (A) and nut (B) which secure
the air cleaner case (front) to the body.
(B)
9) Remove the air cleaner case (front).
Air Cleaner Case
IN-00203
intake duct. <Ref.
(B)
(B)
IN-02273
(A)
IN-02445
IN(H4DOTC)-9
B: INSTALLATION
1) Install the bolt (A) and nut (B) which secure the
air cleaner case (front) to the body.
Tightening torque:
Bolt (A)
6 N·m (0.6 kgf-m, 4.4 ft-lb)
Nut (B)
7.5 N·m (0.8 kgf-m, 5.5 ft-lb)
(B)
to
2) Install the air cleaner element.
3) Install the air cleaner case (rear) and air intake
boot.
NOTE:
When installing the air cleaner case (rear), align the
protrusion of the air cleaner case (rear) to the hole
on the air cleaner case (front) to install.
Tightening torque:
2.5 N·m (0.3 kgf-m, 1.8 ft-lb)
4) Install the clip (B) to the air cleaner case (front).
INTAKE (INDUCTION)
(A)
IN-02445
IN-02376
IN-02475