Adjusting The Altitude - Xerox VersaLink B7025 User Manual

To adjust the registration, touch Lead/Side Registration.
6.
a. To adjust the side-to-side registration, for Side Registration, touch Plus (+) or Minus (-).
To adjust the top-to-bottom registration, for Lead Registration, touch Plus (+) or Minus (-).
b.
For reference, position the chart so that Side-1 or Side-2 dots are at the bottom of the page.
• For Lead Registration, a positive value shifts the image down the page.
• For Side Registration, a positive value shifts the image to the left.
7. To save your settings, touch OK.
8. As needed, repeat steps 4 through 6 to enter additional values.
9. Print another sample page, then repeat the process until you complete the registration corrections.
10. To return to the Home screen, press the Home button.

Adjusting the Altitude

You can use Adjust Altitude to set the altitude to match the printer location. If the altitude setting is
incorrect, it can cause print-quality problems.
To adjust the altitude:
1. At the printer control panel, press the Home button.
2. Touch Device > Support > Altitude Adjustment.
Touch the altitude of the location of the printer, then touch OK.
3.
4. To return to the Home screen, press the Home button.
Xerox VersaLink B7025/B7030/B7035 Multifunction Printer
® ®
Maintenance
195
User Guide