Adjusting Altitude; Firmware Upgrade Procedure - Xerox Phaser 3330 Service Manual

Adjusting Altitude

Print quality varies with barometric pressure. Since the barometric pressure decreases as the altitude
increases, altitude can affect the print quality. To optimize print quality for your location, select an
altitude setting to match the your location.
4,000 m
(13,123 ft)
3,000 m
(9,842 ft)
2,000 m
(6,651 ft)
1,000 m
(3,280ft)
To adjust altitude:
For Phaser 3330
1. Select Menu.
2. Use the arrow buttons to select Tools > Setup > Machine Settings > Altitude Adjustment.
3. Select Enable or Disable and press OK.
For 3335/3345
1. Enter the Admin Mode.
2. Press the Log In / Out button.
3. Enter the Username and Password (Defaut Username: admin, Default Password: 1111).
4. Select Device Settings.
Select General.
5.
Select Altitude Adjustment (On/Off).
6.

Firmware Upgrade Procedure

Upgrade printer firmware using one of two methods:
• Remote using CWIS
• Local using a USB Flash drive
Xerox Internal Use Only
Value
High 3
1
High 2
2
3 High 1
Normal
4
s3320-119
Phaser 3330 and WorkCentre 3335/3345
Maintenance
6-7
Service Manual