Image Quality
Random Spots
Initial Actions
5-18
There are spots of toner randomly scattered across the page.
•
Check the paper transfer path.
•
Ensure there is no debris on the transfer path.
Troubleshooting Reference Table
Applicable Parts
Transfer Roller, PL1.1.9
Fuser, PL5.1.1
Troubleshooting Procedure Table
Step
Actions and Questions
1
Clean the LED windows and the
inside of the printer. See "Cleaning"
on page 7-3 and "Maintenance" on
page 7-8.
Does the image print correctly?
2
Check the paper being used.
Is it approved paper?
3
Does the image print correctly?
4
Reseat and lock the Toner
Cartridges.
Does the image print correctly?
5
Replace the Transfer Roller
(page 8-14).
Does the image print correctly?
6
Replace the Fuser (page 8-80).
Warning:
Allow the Fuser to cool
before replacing.
Xerox Internal Use Only
Example Print
Random Spots
Yes
No
Complete.
Go to step 2.
Go to step 4.
Load supported
media, then go
to step 3.
Complete.
Go to step 4.
Complete.
Go to step 5.
Complete.
Go to step 6.
Complete.
Phaser 6000/6010 and WC 6015 MFP