Limitation Of Access By Time Worksheet; Access Control Schedules - ADEMCO VISTA-100 Installation Instructions Manual

Limitation of Access by Time Worksheet

Access Control Schedules

– 146 –
www.PDF-Zoo.com
Limitation of Access is a means by which a user's access code is limited to
working during a certain period of time. The system provides 8 Access
Schedules, each of which consists of two time windows for each day of the week
and two time windows for holidays (typically one for an opening time window and
the second for a closing time window). If an Access Schedule has been
programmed, a user required to follow that schedule would be assigned to an
Access Group of the same number (1-8) when that user is added to the system.
If no limitations apply, enter 0.
Enter the appropriate time window numbers for each partition.
Acc Mon Tues Wed Thurs
Sch W1 W2 W1 W2
1
2
3
4
5
6
7
8
To program Access Schedules, do the following:
Enter Scheduling Menu Mode [Installer Code] + # 80. After entering Scheduling
Menu Mode, press 0 until the Access Sched. ? prompt appears.
Enter 1 to program access schedules.
Access Sched. ?
1 Yes 0 = No 0
Enter the access control schedule number between 01
ACCESS SCHED # ?
01-08, 00 = Quit 01 and 08. Press * to accept entry.
Enter 00 at the Access Sched # prompt to quit the
Access control menus and display the Quit ? prompt.
Enter 0 at the Quit ? prompt to
return to the main menu choices
and continue programming. Enter
1 to quit Scheduling Menu Mode.
Enter the first time window number from 01-20 for which
MON A1 Window 1?
00:00 00:00 00 this access schedule applies for the displayed day. As
the number is keyed in, the actual time that has been
stored for the window will be displayed. Press * to
continue.
Enter the second time window number from 01-20 for
MON A1 Window 2 ?
00:00 00:00 00 which this access schedule applies for the displayed
day. As the number is keyed in, the actual time that has
been stored for the window will be displayed. Press * to
continue.
Repeat the procedure for the other days of the week.
TUE A1 Window 1?
When the last day of the week has been programmed,
00:00 00:00 00
the holiday opening and closing windows may be
entered.
firealarmresources.com
Fri Sat Sun
W1 W2 W1 W2 W1 W2
Hol
W1 W2 W1 W2 W1 W2
Quit ?
1 = YES 0 = NO 0