Configuring General System Settings; Name The System; Enter Contact Information - Polycom RealPresence Group Series Administrator's Manual

Configuring General System Settings

Topics:
•

Name the System

•

Enter Contact Information

• Set the Location
• Set the Language
• Set the Date and Time
• Displaying Participant Names Continuously in a Call
Name the System
The RealPresence Group Series system name displays on the screens of far-end sites during a call.
The system interface supports the 16 language fonts listed in the following figure. Other languages might
not display correctly. It is recommended that the first character of a system name must be a letter or a
number. The system supports double-byte characters.
Procedure
1. In the system web interface, go to Admin Settings > General Settings > System Settings >
System Name.
2. In the System Name field, enter a name and click Save.
Enter Contact Information
Enter contact information for your system so that users know whom to call when they need assistance.
Procedure
1. In the system web interface, go to Admin Settings > General Settings > My Information >
Contact Information.
2. Configure the following settings.
Polycom, Inc. 29