Mazda RX-8 Workshop Manual page 1926

2011 - rx-8
Hide thumbs Also See for RX-8:
Table of Contents

Advertisement

1AB (such as damaged/pulled-out pins,
corrosion).
Is terminal normal?
INSPECT RESISTANCE OF SHIFT SOLENOID B CIRCUIT
4
Inspect for resistance between TCM terminal
1AB (wiring harness-side) and body ground.
Is the resistance within 10—16 ohms?
(See
SOLENOID VALVE INSPECTION [SJ6A-
EL].)
INSPECT COUPLE COMPONENT CONNECTOR FOR POOR
5
CONNECTION
Turn the ignition switch to the LOCK position.
Disconnect the couple component connector.
Inspect for poor connection at couple
component terminal N (such as
damaged/pulled-out pins, corrosion).
Is terminal normal?
INSPECT RESISTANCE OF SHIFT SOLENOID B CIRCUIT
6
Inspect the resistance between couple
component (transmission case side) terminal
N and body ground.
Is the resistance within 10—16 ohms?
(See
SOLENOID VALVE INSPECTION [SJ6A-
EL].)
INSPECT SHIFT SOLENOID B CONNECTOR FOR POOR
7
CONNECTION
Turn the ignition switch to the LOCK position.
Disconnect the shift solenoid B connector.
Inspect for poor connection at shift solenoid
B terminal A (such as damaged/pulled-out
pins, corrosion).
Is terminal normal?
INSPECT SHIFT SOLENOID B
8
Inspect the shift solenoid B.
(See
SOLENOID VALVE INSPECTION [SJ6A-
EL].)
Is the shift solenoid B normal?
VERIFY TROUBLESHOOTING OF DTC P0976
9
COMPLETED
Make sure to reconnect all the disconnected
connectors.
Clear the DTC from the memory using the M-
MDS.
YesGo to Step 9.
No Go to the next step.
YesGo to the next step.
No Repair or replace the connector and/or terminal, then go to Step
9.
YesGo to the next step.
No Go to Step 9.
YesGo to the next step.
No Repair or replace the connector and/or terminal, then go to Step
9.
YesRepair or replace the wiring harness (couple component
connector—shift solenoid B) for short to ground, then go to the
next step.
No Replace the control valve body, then go to the next step.
(See
CONTROL VALVE BODY REMOVAL
(See
CONTROL VALVE BODY INSTALLATION
YesReplace the TCM, then go to the next step.
(See
TCM REMOVAL/INSTALLATION
No Go to the next step.
[SJ6A-EL].)
[SJ6A-EL].)
[SJ6A-EL].)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2011 rx-8

Table of Contents