Mazda RX-8 Workshop Manual page 1856

4. Press the clear button on the DTC screen to clear the DTC.
5. Perform the following trouble code inspections to ensure that the DTC has been resolved:
P0601, P0603, P0604, P0712, P0713, P0717, P0722,
P0882, P0961, P0962, P0963, P0969, P0970, P0971,
P0973, P0974, P0976, P0977, P0979, P0980, P0982,
P0983, P0985, P0986, P2719, P2720, P2721, P2762,
P2763, P2764
P0707
DTC No. inspection
Start the engine.
Warm up the engine
and AT.
Drive the vehicle in D
range and make sure
that the gears shift
smoothly from 1GR to
6GR.
Gradually slow down
and stop the vehicle.
Turn the ignition
switch to the LOCK
position.
Go to Step 6.
Start the engine.
Warm up the engine
to normal operating
temperature.
Depress the brake
pedal, and shift the
selector lever from P
to D for 2 s or more.
Gradually slow down
and stop the vehicle.
Turn the ignition
switch to the LOCK
position.
Go to Step 6.
Start the engine.
Warm up the engine
to normal operating
temperature.
Depress the brake
pedal, and shift the