Port Channel Configuration - Motorola Solutions WiNG 5.2.6 Reference Manual

5.3.4.3 Port Channel Configuration


Profile Interface Configuration
The access point's profile can be applied customized port channel configurations as part of its Interface configuration.
To define a port channel configuration for a controller profile:
1. Select the Configuration
2. Select Devices.
3. Select System Profile
4. Expand the Interface
5. Refer to the following to review existing port channel configurations and their current status:
Name
Type
Description
Admin Status
6. To edit the configuration of an existing port channel, select it from amongst those displayed and select the
The port channel Basic Configuration screen displays by default.
Figure 5-12 Profile Interfaces - Port Channels screen
tab from the Web UI.
from the options on left-hand side of the UI.
menu and select Port Channels.
Displays the port channel's numerical identifier assigned to it when it was
created. The numerical name cannot be modified as part of the edit process.
Displays whether the type is port channel.
Lists a a short description (64 characters maximum) describing the port channel
or differentiating it from others with similar configurations.
A green checkmark defines the listed port channel as active and currently
enabled with the access point's profile. A red "X" defines the port channel as
currently disabled and not available for use. The interface status can be
modified with the port channel configuration as required
Device Configuration 5 - 25
Edit button.