Motorola Solutions WiNG 5.2.6 Reference Manual page 253

7. Define or override the following
Designated IS Priority
Adjustment
8. Select the Latency of Routing Recalculation
spinner control used for defining or overriding a latency period between 0 - 60 seconds. The default setting has the
check box disabled.
9. Define or override the following
MLCP IP
MLCP VLAN
10. Select OK to save the changes and overrides made to the Settings tab. Select
configuration.
11. Select the IP tab to display the link IP network address information shared by the devices managed by the MINT
configuration.
Priority Adjustment settings:
Use the spinner control to set a Designated IS Priority Adjustment setting
between -255 and 255. This is the value added to the base level DIS priority
to influence the Designated IS (DIS) election. A value of +1 or greater
increases DISiness. The default setting is 0.
check box (within the Shortest Path First (SPF) field) to enable the
MINT Link Settings:
Check this box to enable MINT Link Creation Protocol (MLCP) by IP Address.
MINT Link Creation Protocol is used to create one UDP/IP link from the
device to a neighbor. That neighboring device can be another AP.
Check this box to enable MLCP by VLAN. MLCP is used to create one VLAN
link from the device to a neighbor. That neighboring device can be another
AP.
Device Configuration 5 - 195
Reset to revert to the last saved