Defining Dhcp Server Global Settings - Motorola Solutions WiNG 5.2.6 Reference Manual

8 - 24 WiNG 5.6.2 Access Point System Reference Guide
18.Set the following
NetBIOS Node Type
NetBIOS Servers
19.Refer to the
subnet options applies to just the clients on a specified subnet.
a. Select the
differentiate it from others with similar configurations. At any time you can select the radio button of an
existing option and select the
b. Assign a
applies to the vendor class for which it's defined.
20.Refer to the
Select the
21.Select OK
its last saved configuration.

8.3.2 Defining DHCP Server Global Settings

Setting a DHCP server global configuration entails defining whether BOOTP requests are ignored and setting DHCP
global server options.
To define DHCP server global settings:
1. Select the
option must remain selected to implement the configuration as part of the access point profile.
NetBIOS parameters for the network pool:
Set the NetBIOS Node Type used with this pool. The following types are
available:
Broadcast - Uses broadcasting to query nodes on the network for the owner of
a NetBIOS name.
Peer-to-Peer - Uses directed calls to communicate with a known NetBIOS
name server, such as a WINS server, for the IP address of a NetBIOS machine.
Mixed - Is a mixed node using broadcasted queries to find a node, and failing
that, queries a known p-node name server for the address.
Hybrid - Is a combination of two or more nodes.
Undefined - No NetBIOS Node Type is used.
Specify a numerical IP address of a single or group of NetBIOS WINS servers
available to DHCP supported wireless clients.
DHCP Option Values table to set global DHCP options applicable to all clients, whereas a set of
+ Add Row button to add individual options. Assign each a
Delete
Value to each option with codes in the range 1 through 254. A vendor-specific option definition only
Static Routes Installed on Clients
+ Add Row button to add individual options for
to save the updates to the DHCP pool's Advanced settings. Select
Global Settings tab and ensure the
icon to remove it from the list of those available.
table to set fixed routes for client destination and gateways.
Destination
Activate DHCP Server Policy
Global DHCP Option Name
and Gateway addresses.
Reset to revert the screen back to
button remains selected. This
to help