Motorola Solutions WiNG 5.2.6 Reference Manual page 179

NOTE: A blue override icon (to the left of a parameter) defines the parameter as having
an override applied. To remove an override, go to the Basic Configuration screen's Device
Overrides field and select Clear Overrides. This will remove all overrides from the device.
6. Refer to the Basic Configuration
configuration, and optionally assign/remove overrides to and from specific parameters.
Location
Contact
Time Zone
Country Code
Figure 5-67 RF Domain Overrides screen
field to review the basic settings defined for the target device's RF Domain
Set the deployment location for the access point as part of its RF Domain
configuration.
Set the administrative contact for the access point. This should reflect the
administrator responsible for the maintenance of the access point
configuration and wireless network.
Use the drop-down menu to select the geographic time zone supporting its
deployment location.
Use the drop-down menu to select the country code supporting its deployment
location.
Device Configuration 5 - 121