Dhcp Class Policy Configuration - Motorola Solutions WiNG 5.2.6 Reference Manual

8 - 26 WiNG 5.6.2 Access Point System Reference Guide

8.3.3 DHCP Class Policy Configuration

The DHCP server assigns IP addresses to DHCP enabled wireless clients based on user class option names. Clients
with a defined set of user class option names are identified by their user class name. The DHCP server can assign IP
addresses from as many IP address ranges as defined by the administrator. The DHCP user class associates a
particular range of IP addresses to a device in such a way that all devices of that type are assigned IP addresses from
the defined range.
Refer to the
designations. Multiple user class options enable a user class to transmit multiple option values to DHCP servers
supporting multiple user class options. Either add a new class policy, edit the configuration of an existing policy or
permanently delete a policy as required.
To review DHCP class policies:
1. Select the
must remain selected to implement the configuration as part of the access point profile.
2. Select Add
policy.
DHCP Class Policy screen to review existing DHCP class names and their current multiple user class
Class Policy tab and ensure the
Figure 8-13 DHCP Server Policy screen - Class Policy tab
to create a new DHCP class policy,
Activate DHCP Server Policy
Edit to update an existing policy or
button remains selected. This option
Delete to remove an existing