Motorola Solutions WiNG 5.2.6 Reference Manual page 61

2. Define the following Basic Configuration
Location
Contact
Time Zone
Country
VLAN for Traffic
Control
Figure 5-1 RF Domain - Basic Configuration screen
values for the access point RF Domain:
Assign the physical location of the RF Domain. This name could be as specific
as the floor of a building, or as generic as an entire site. The location defines
the physical area where a common set of access point configurations are
deployed and managed by the RF Domain policy.
Provide the name of the contact email (or administrator) assigned to respond
to events created by or impacting the RF Domain.
Set the geographic time zone for the RF Domain. The RF Domain can contain
unique country codes and time zone information to access points deployed
across different states or countries, thus making them ideal for managing
device configurations across different geographical deployments.
Define the two-digit country code set for the RF Domain. The country code
must be set accurately to avoid the policy's illegal operation, as device radios
transmit in specific channels unique to the country of operation.
Select the check box to enable a spinner control used for specifying the VLAN
(within a range of 1 - 4,094) used for traffic control within this RF Domain.
Device Configuration 5 - 3