Motorola Solutions WiNG 5.2.6 Reference Manual page 375

4. If adding a new rule, enter a name up to 32 characters in length.
5. Define the following parameters for the IP Firewall Rule:
Allow
Source
Figure 7-5 IP Firewall Rules screen - Adding a new rule
Every IP Firewall rule is made up of matching criteria rules. The action
defines what to do with a packet if it matches the specified criteria. The
following actions are supported:
Deny - Instructs the Firewall to not to allow a packet to proceed to its
destination.
Permit - Instructs the Firewall to allow a packet to proceed to its
destination.
Enter both Source and Destination IP addresses. The access point uses the
source IP address, destination IP address and IP protocol type as basic
matching criteria. The access policy filter can also include other
parameters specific to a protocol type (like source and destination port for
TCP/UDP protocol. Provide a subnet mask if needed.
Security Configuration 7 - 15