Motorola Solutions WiNG 5.2.6 Reference Manual page 113

7. Set a destination MAC Address
forward the packet or drop (filter) it. If it's determined the destination MAC is on a different network, it forwards the
packet to the segment. If the destination MAC is on the same network segment, the packet is dropped (filtered).
8. Define the target VLAN ID
9. Provide an Interface Name
10. Select OK to save the changes. Select
address. The bridge reads the packet's destination MAC address and decides to
if the destination MAC is on a different network segment.
used as the target destination interface for the target MAC address.
Reset to revert to the last saved configuration.
Device Configuration 5 - 55