Table of Contents
Advertisement
5 - 24 WiNG 5.4.2 Access Point System Reference Guide
5.2.4.3 Port Channel Configuration
Profile Interface Configuration
The access point's profile can be applied customized port channel configurations as part of its Interface configuration.
To define a port channel configuration for an access point profile:
1. Select the
Configuration
2. Select
Devices.
3. Select
System Profile
4. Expand the
Interface
5. Refer to the following to review existing port channel configurations and their current status:
Name
Type
Description
Admin Status
6. To edit the configuration of an existing port channel, select it from amongst those displayed and select the
Port Channel Basic Configuration screen displays by default.
Figure 5-13 Profile Interfaces - Port Channels screen
tab from the Web UI.
from the options on left-hand side of the UI.
menu and select
Port
Channels.
Displays the port channel's numerical identifier assigned to it when it was created. The
numerical name cannot be modified as part of the edit process.
Displays whether the type is port channel.
Lists a a short description (64 characters maximum) describing the port channel or
differentiating it from others with similar configurations.
A green check mark defines the listed port channel as active and currently enabled with
the access point's profile. A red "X" defines the port channel as currently disabled and not
available for use. The interface status can be modified with the port channel configuration
as required
Edit
button. The
Hide quick links:
Advertisement
Table of Contents
