Motorola Solutions WiNG 5.2.6 Reference Manual page 435

25.Select Add to add a new LDAP server configuration,
to remove a LDAP server from the list of those available.
26.Set the following Network
Redundancy
IP Address
Login
Port
Timeout
Edit
Figure 8-24 LDAP Server Add screen
address information required for the connection to the external LDAP server resource:.
Define whether this LDAP server is a primary or secondary server
resource. Primary servers are always queried for the first connection
attempt. However, designating at least one secondary server is a good
practice to ensure RADIUS user information is available if a primary
server were to become unavailable.
Set the IP address of the external LDAP server acting as the data source
for the RADIUS server.
Define a unique login name used for accessing the remote LDAP server
resource. Consider using a unique login name for each LDAP server to
increase the security of the connection between the access point and
remote LDAP resource.
Use the spinner control to set the physical port used by the RADIUS
server to secure a connection with the remote LDAP server resource.
The default port is 389.
Set an interval between 1 - 10 seconds the RADIUS server uses as a
wait period for a response from the target primary or secondary LDAP
server resource. The default setting is 10 seconds.
Services Configuration 8 - 43
to modify an existing LDAP server configuration or Delete