Motorola Solutions WiNG 5.2.6 Reference Manual page 222

5 - 164 WiNG 5.2.6 Access Point System Reference Guide
6. Set or override the following parameters for the IP DSCP mappings for untagged frames:
DSCP
802.1p Priority
7. Use the spinner controls within the
value.
8. Select the
configuration.
Figure 5-86 Profile Overrides - Network QoS screen
Lists the DSCP value as a 6-bit parameter in the header of every IP packet used
for packet classification.
Assign a 802.1p priority as a 3-bit IP precedence value in the Type of Service
field of the IP header used to set the priority. The valid values for this field are
0-7. Up to 64 entries are permitted. The priority values are:
0 – Best Effort
1 – Background
2 – Spare
3 – Excellent Effort
4 – Controlled Load
5 – Video
6 – Voice
7 – Network Control
802.1p
OK button located to save the changes and overrides. Select
Priority field for each DSCP row to change or override the priority
Reset to revert to the last saved