Motorola Solutions WiNG 5.2.6 Reference Manual page 346

6 - 84 WiNG 5.2.6 Access Point System Reference Guide
3. Select the
4. If creating a new
support. The name cannot exceed 32 characters.
5. Set the following parameters for the creation or modification of the Association ACL:
Precedence
Starting MAC
Address
Ending MAC
Address
Allow/Deny
6. Select the
7. Select OK
Figure 6-31 Association ACL screen
+ Add Row button to add an association ACL template that requires configuration.
Association ACL, provide a name specific to its function. Avoid naming it after a WLAN it may
The rules within a WLAN's ACL are applied to packets based on their
precedence values. Every rule has a unique sequential precedence value
you define. You cannot add two rules's with the same precedence value.
The default precedence is 1, so be careful to prioritize ACLs accordingly as
they are added.
Provide a starting client MAC address for non unicast and multicast packet
transmissions.
Provide an ending MAC address for non unicast and multicast packet
transmissions.
Use the drop-down menu to either Allow or Deny access if a MAC address
matches this rule.
+ Add Row radio button to add MAC address ranges and allow/deny designations.
to update the Association ACL settings. Select Reset to revert to the last saved configuration.