Motorola Solutions WiNG 5.2.6 Reference Manual page 290

6 - 28 WiNG 5.2.6 Access Point System Reference Guide
7. Define the following parameters for either inbound or outbound IP Firewall Rules:
Allow
Source
Figure 6-10 WLAN IP Firewall Rules screen
Every IP Firewall rule is made up of matching criteria rules. The action
defines what to do with the packet if it matches the specified criteria. The
following actions are supported:
Deny - Instructs the Firewall to prohibit a packet from proceeding to its
destination.
Permit - Instructs the Firewall to allow a packet to proceed to its
destination.
Enter both Source and Destination IP addresses. The access point uses the
source IP address, destination IP address and IP protocol type as basic
matching criteria. The access filter can also include other parameters
specific to a protocol type (like source and destination port for TCP/UDP
protocol). Provide a subnet mask if needed.