Port Channel Configuration - Motorola WiNG 5.7.1 System Reference Manual

33. Use the IPv4 Inbound Firewall Rules
profile's virtual interface configuration. Select the
Edit icon to modify an existing configuration.
IPv4 is a connectionless protocol for packet switched networking. IPv4 operates as a best effort delivery method, since it
does not guarantee delivery, and does not ensure proper sequencing or duplicate delivery (unlike (TCP).
IPv4 and IPv6 are different enough to warrant separate protocols. IPv6 devices can alternatively use stateless address
autoconfiguration. IPv4 hosts can use link local addressing to provide local connectivity.
Use the IPv6 Inbound Firewall Rules
profile's virtual interface configuration. Select the
Edit icon to modify an existing configuration.
IPv6 is the latest revision of the Internet Protocol (IP) replacing IPv4. IPV6 provides enhanced identification and location
information for systems routing traffic across the Internet. IPv6 addresses are composed of eight groups of four
hexadecimal digits separated by colons.
34. Use the VPN Crypto Map
Crypto Map entry defines the type of VPN connection and its parameters. For more information, see
Settings on page
35. Use the Web Filter
Web filtering is used to restrict access to resources on the Internet.
36. Select the OK button located at the bottom right of the screen to save the changes to the Security screen. Select
revert to the last saved configuration.

5.2.5.3 Port Channel Configuration

Profile Interface Configuration
The access point's profile can be applied to customize the port channel configurations as part of its interface configuration.
To define a port channel configuration for an access point profile:
1. Select the Configuration
drop-down menu to select the IPv4 specific inbound firewall rules to apply to this
drop-down menu to select the IPv6 specific inbound firewall rules to apply to this
drop-down menu to select and assign a VPN crypto map entry to this virtual interface. The VPN
5-129.
drop-down menu to select or override the
Figure 5-27 Profile Interfaces - Port Channels screen
tab from the Web UI.
Create icon to define a new IPv4 firewall rule configuration or select the
Create icon to define a new IPv6 firewall rule configuration or select the
URL Filter configuration applied to this virtual interface.
5 - 41
Defining Profile VPN
Reset to