Device Specific Information - Motorola Solutions WiNG 5.2.6 Reference Manual

4 - 12 WiNG 5.2.6 Access Point System Reference Guide
• Quality – Select this option to filter based on the overall RF health. RF health is a ratio of connection rate, retry
rates, and error rates. Quality results include: Red (Bad Quality, Orange (Poor Quality), Yellow (Fair Quality) and
Green (Good Quality).
• Vendor – Displays the device manufacturer.
• Band – Select this option to filter based on the 2.4 or 5 GHz radio band of connected clients. Results include:
Yellow (2.4 GHz radio band) and Blue (5.GHz radio band). Selecting Band is a good way to determine whether
2.4 and 5 GHz radios are optimally deployed in respect to the access point client loads on both bands.
• Channel - Use the drop-down menu to filter whether device connections should be displayed in either the 2.4
or 5 GHz band.
• Search - Enter search criteria in the provided text field and select the
variables in blue within the Network View display.
3. Select the
the options field and remove it from the Network View.

4.2.2 Device Specific Information


Network View
A device specific information screen is available for individual devices selected from within the Network View (not
the System Browser). The screen displays the name assigned to the device, its model, factory encoded MAC address,
number or radios within the device, number of connected clients, as well as the highest and lowest reported Quality,
Utilization and Signal to Noise Ratio (SNR) This information cannot be modified by the administrator.
Optionally select the
reviewed on a much more granular level. For more information, see
Update button to update the display with the changes made to the filter options. Select
Figure 4-15 Device Specific Information
Statistics link at the bottom of the display a screen where Access Point device data can be
Update button to isolate located
Health on page 4-3.
Close to close