Motorola Solutions WiNG 5.2.6 Reference Manual page 97

13. Refer to the WLAN/BSS Mappings field to set WLAN BSSID assignments for an existing access point deployment.
Administrators can assign each WLAN its own BSSID. If using a single-radio access point, there are 8 BSSIDs
available. If using a dual-radio access point there are 8 BSSIDs for the 802.11b/g/n radio and 8 BSSIDs for the
802.11a/n radio.
Each supported access point model can support up to 8 BSS IDs.
14. Select the OK button located at the bottom right of the screen to save the changes to the WLAN Mapping. Select
Reset to revert to the last saved configuration.
15. Select the Mesh tab.
Figure 5-19 Access Point Radio - WLAN Mapping tab
Device Configuration 5 - 39