Motorola Solutions WiNG 5.2.6 Reference Manual page 459

9. Refer to the Select a Device
10.Select Fetch Historical Events
RF Domain events. The following event data is fetched and displayed:
Timestamp
Module
Message
Severity
Source
RF Domain
11.Select Clear Events to clear the event table and begin a new data collection for the specified device.
Figure 10-3 Fault Management Event History screen
field, and specify a single device MAC address for event tracking.
from the lower, right-hand, side of the UI to populate the table with either device or
Displays the timestamp (time zone specific) each listed event occurred.
Displays the module tracking the listed event. Events detected by other
modules are not tracked.
Displays error or status message for each event.
Displays event severity as defined for tracking from the Configuration screen.
Severity options include:
All Severities – All events are displayed regardless of severity
Critical – Only critical events are display
Error – Only errors display
Warning – Only warnings display
Informational – Only informational events display, no critical events, errors or
warnings.
Displays the MAC address of the device tracked by the selected module.
Displays the RF Domain where the selected access point MAC address resides.
Diagnostics 10 - 5